在给焊接行业带来便利的时候，我们同样不能忽略中频点焊机的日常保养，中频点焊机的电极头修整对于整个中频点焊机设备的维护保养十分重要，而且电极头的修整直接影响到实际的焊接工作的焊接质量。 When the IF spot welding machine brings convenience to the welding industry, we can also not ignore the daily maintenance of the IF spot welding machine. The electrode tip repair of the IF spot welding machine is very important for the maintenance of the entire IF spot welding machine equipment, and the electrode head The trimming directly affects the welding quality of the actual welding work. Next, I will introduce the electrode tip trimming of the intermediate frequency spot welding machine.
The electrode tip of the mid-frequency spot welder must be kept clean. After a certain period of time, the electrode wears or the surface is damaged. A copper wire brush can be used. High-quality fine file or sandpaper smoothing, the specific method is as follows:
1. Place the fine-grained flat file between the upper and lower electric levels, place the function selection knob in the "air valve" position, depress the foot switch to the bottom, make the electrode clamp the file, and turn the file back and forth in the horizontal direction. After the contact surface between the electrodes is smoothed, release the foot pedal and reset the upper electrode;
2. Grind the electrode contact surface with fine sandpaper to keep the electrode in good contact with the workpiece;
3. When the electrode wear is serious, it must be trimmed with machine tools.
ra.com（ 中频 点凸焊机厂家 ） Reprint please indicate the source: Anjia spot welding machine www.szage ra.com ( intermediate frequency spot welding machine manufacturer )