由机架、加压机构、变压器、电容、控制器和气动部分组成，广泛用于低碳钢、不锈钢、铜、合金的焊接。 Capacitor energy storage spot welding machine is composed of frame, pressurizing mechanism, transformer, capacitor, controller and pneumatic part, which is widely used for welding of low carbon steel, stainless steel, copper and alloy. The PLC control core effectively controls the charging and discharging process, and can separately adjust the preload, discharge, forging, maintenance, rest time and charging voltage value, and the standard adjustment is very convenient. The specially designed special control circuit has the functions of phase-shift trigger charging, discharge current detection and commutation discharge, so that the capacitor energy storage spot welding machine can avoid the energy consumption caused by the heating of the current limiting resistance, and also avoid the magnetization of the welding resistance transformer. Below Anjia editor will introduce its operation method for everyone.
First turn on the power of the unit, then turn on the key power switch on the control cabinet, first adjust the "empty / welding" switch on the control box to the "empty" gear, and then adjust the "manual / automatic" switch on the front of the welding machine to On "Manual", press the "Start" button to perform single-step operation to adjust the appropriate electrode position, cylinder pressure and other parameters. After adjustment, set the "Idle / Welding" switch to "Welding" and then press "Start" to proceed Adjust the welding parameters in a single step. After all adjustments, set the "manual / automatic" switch to "automatic", you can directly use the "start" switch to operate the automatic welding.
Before starting the machine, the two lower cylinders are in a loosened state. The working sequence of the welding machine is: turn on the power, turn on the key switch, put the workpiece on the upper and lower electrodes, press the start switch, and the lower fixture is pushed by the two cylinders to clamp the workpiece; (Note: At this time, ensure single-person operation, and ensure that no buttons are touched when placing the cylindrical workpiece to be welded, so as not to cause external damage.) After the workpiece is placed, if it is in the automatic state, after pressing the start button, the remaining actions are in turn Finish, the sequence is: press the start button, the upper cylinder pushes the upper clamp down to clamp the workpiece to be welded, then the left welding cylinder pushes the left upper electrode to press the cylindrical piece, discharge welding, after the end, the left cylinder returns, the right cylinder automatically Under the discharge welding, the return is completed, and then the upper cylinder returns to loosen the workpiece, and the lower fixture is also automatically released under the drive of the cylinder to complete a welding. If the workpiece is placed in manual mode, you can press the start button one by one to operate in the above order.
Suzhou Anjia Automation Equipment Co., Ltd. is a professional welding equipment manufacturer, focusing on the development and sales of energy-efficient resistance welding machines, automated welding equipment and industrial non-standard special welding equipment. Anjia focuses on how to improve welding quality, welding efficiency and reduce welding cost. 。 If you are interested in our capacitor energy storage projection welding machine, please contact us: 400-8283-566 .
点焊机92shizhi.com（ 电容储能焊机厂家 ） Reprint please indicate the source: Anjia spot welding machine 92shizhi.com ( capacitor energy storage welding machine manufacturer )