The peripheral equipment of the spot welding robot workstation mainly includes the following aspects: 1. Safety fence; 2. Public base; 3. Operating platform; 4. Cable bridge; In addition, there are upper support, welding system and so on. The following editors will give you a detailed introduction:
Safety fence (or welding room): There are safety fences around the workstation, and there should be safety light curtains and pneumatic light curtains in the upper area. A safety door is installed on one side, and a safety switch is provided on the safety door to form a safe isolation area for the robot workstation. In order to save space, some welding rooms are designed as a two-story structure, with robot control cabinets, welding machines, etc. placed on them. Air outlets are usually provided above the welding room.
Public base: including robot base, positioner base, and workstation base, which can be made into one body, but sometimes for the convenience of transportation, it is often made into a component structure and rigidly connected by connecting pieces.
Operation table: If a workstation has only one set of jigs, only one operation table is required. If a workstation requires more than two jigs as shown in the figure above, an operation box is also required. The height of the console and the buttons on the control panel should meet the basic ergonomic requirements. Generally, a two-hand start button switch should be used on the operation panel to avoid starting the equipment while loading and unloading the workpiece, which may cause personal injury.
Cable tray: store all kinds of cables, power lines, welding wire, signal lines. Mainly to play the role of beautiful and clean workstation.
Upper piece support: Some workpieces have large workpieces and a large range of fixture rotation, so an upper piece support is needed to facilitate the operator to load and unload the workpiece. Material bin for storing workpieces. Tri-color lights that indicate the status of the workstation system, etc.
The welding system must meet the welding requirements of the workpiece, so I won't go into details here.
Suzhou Anjia Automation Equipment Co., Ltd. is a professional welding equipment manufacturer, focusing on the development and sales of energy-efficient resistance welding machines, automatic welding equipment and industrial non-standard special welding equipment. Anjia focuses on how to improve welding quality, welding efficiency and reduce welding. cost. If you are interested in our spot welding robot workstation, please contact us: 400-8333-566.
Reprint please indicate the source: Anjia spot welding robot workstation 92shizhi.com ( spot welding robot workstation )